Venom SHR Super Carve Bushings
Please Note: A quantity of "1" is enough for a single truck. Order 2 for a complete setup. Washers are NOT included.
Top Tip: Want something in between double conicals and double barrels? Try pairing a set of SHR Super Carves (Conicals) and SHR Double Barrels for perfect mix!
Venom Bushings are considered the highest quality bushings by experienced downhill riders and longboard enthusiasts. The SHR (Super High Rebound) Double Barrel Bushings are used for downhill freeride, carving, and cruising. With a little more spring out out of your turns you can spend less time trying to level yourself out, and more time shredding!
The Venom Super Carves are designed to deliver the ultimate turning experience. Quick turns, tight turns, deep turns. Double conical bushings provide the least possible turn resistance but still have enough spring to keep you on track.
Plain and simple, the Downhill Double-Barrel Pack is built for speed. Double barrels, teamed with cup washers can give your setup that fully locked in feel that gives you the confidence you need to grab some serious velocity.
We started working on SHR in March of 2009. There seemed to be a demand for an insanely high rebound bushing, but there just didn't seem to be any good ones on the horizon. The problem was, the other super springy bushings on the market were only super springy. No damping. Cars have springs AND shocks for a reason! All the rebound with no control has a great effect on stability and adjust-ability. If you try to tighten your trucks with no damping, a lot of the time the bushing just squishes, and you get no more tension.
Choosing Your Setup
When selecting your bushings, remember to select for your weight, not necessarily just for color! Each durometer will provide a different response and ride feel. In general, when mixing and matching, it is recommended to have the harder (higher duro) bushing boardside and the softer (lower duro) bushing roadside. Refer to the "Downhill" section of the Venom Guide to get your decision making process started!
50-100 lbs: 73-80a
75-125 lbs: 78-82a
100-145 lbs: 80-85a
125-175 lbs: 80-87a
145-195 lbs: 82-90a
175-220 lbs: 85-93a
200-250 lbs: 90-93a
225 lbs and up: 90-97a